TC65159
TC65159
Nominal Rating @6' (LBS):
Boom Length (Nom):
Max Tip Height:
60t - 54.4mt
4-SECTION / 131 ft
194'
The TC650 series telescopic cranes are built to meet the wide-ranging needs of owner operators who may use it for residential construction one day and bridge work the next.
No matter what the task, the 65-ton line of telescopic cranes is designed to get you on the job quickly.
• Go from Free-Swing to No-Free Swing with a push of a button.
• Set up quickly with remote outrigger controls
• Operate comfortably and confidently
• Move from job to job in less time.
No matter what the task, the 65-ton line of telescopic cranes is designed to get you on the job quickly.
• Go from Free-Swing to No-Free Swing with a push of a button.
• Set up quickly with remote outrigger controls
• Operate comfortably and confidently
• Move from job to job in less time.
Boom
Boom lengths: Proportional boom
• 4-section 131 ft.
4-Sheave load quick reeve boom point with 2 idler reeve boom points.
Self lubricating slider pads
Boom max. tip height 60131: 142 ft. (43,3 m)
Boom angle (min/max): -6º / 80º
Rotation
Ball-bearing swing circle with external gear Double reduction planetary gearbox driven by hydraulic motor
Slewing brake: Spring-applied pressure released automatic brake and Free Swing and Non-Free Swing selection from the operator’s keypad.
Slewing speed: 1.5 - 2 rpm. (nominal)
Boom rotation: 360º continuous
Outriggers
Outriggers: Out-and-down style
Outrigger monitoring system (for verification only)
Outrigger motion alarm
Full extension
• Front and rear: 24.5 ft. (7,5 m)
Middle extension
• Front and rear: 17.5 ft. (5,3 m)
Full retraction
• Front and rear: 7.8 ft. (2,4 m)
ROC Solid - Radio operated handheld controller for outrigger, winches and FBS setup
Crane is shipped with the boom radio remote ready.
Operator aids
Externally routed A2B cable. Color graphic display with LMI crane function cut-offs for overload protection, event recorder and WADS-Work Definition System.
HDRI - Hoist Drum Rotation Indicator
vtHoist, Rope and Hook
Maximum theoretical line speed: 453 fpm (138 mpm)
Maximum theoretical bottom-layer line pull: 13,050 lbs. (5,919 kg) Limited to 10,000 lbs.
Main winch cable diameter: 5/8 in. (15,9 mm) rotation resistant
Line length: 60131 - 500 ft. (152 m)
Main winch: Bent axis 2-speed hydraulic motor (activated electrically)
Optional Third Wrap Limiter on both Main and Auxiliary Winch
Hook and Ball: 7T (6,4 mt) capacity hook with heavy-duty swivel and weight is provided for single line operation
Hydraulics
8-bolt direct mounted PTO and SAE C output (factory mounted units only)
1-Section Variable Displacement Piston Pump, SAE C input
Piggy back Fixed Gear Pump
Hydraulic Reservior capacity: 115 Gallon-155 Gallon
Pump Sections @ 2000 RPM with 100 PSI
• Variable Displacement Pump: 77 GPM (291 lpm)
• Fixed Displacement Gear Pump: 12 GPM (45 lpm)
• Optional Front Bumper Stabilizer
Tiltable Cab/Cab Controls
Standard features:
Curved glass, 0º to 20º cab tilt, Sliding door, heated cloth seat, 8 seat adjustments, lumbar support, reclining and adjustable head rest, sliding windows, rear pop out window, top hinged hatch, with guard, front and top windshield wipers, heater, air conditioning, 12 volt DC outlet, USB ports, engine monitoring system, E-coated cab
Controls:
PLC crane controller, CANBUS communication, J1939 truck engine communication, electric hand and foot throttle, twin dual axis joysticks, electric/hydraulic valve actuation, electronic sensor monitoring, Hirschmann/PAT or 3B6 LMI system available, wired ATB and wired wind speed sensors, telematics, GPS monitoring, remote diagnostic capability, Work Area Definition (WADs)
Boom lengths: Proportional boom
• 4-section 131 ft.
4-Sheave load quick reeve boom point with 2 idler reeve boom points.
Self lubricating slider pads
Boom max. tip height 60131: 142 ft. (43,3 m)
Boom angle (min/max): -6º / 80º
Rotation
Ball-bearing swing circle with external gear Double reduction planetary gearbox driven by hydraulic motor
Slewing brake: Spring-applied pressure released automatic brake and Free Swing and Non-Free Swing selection from the operator’s keypad.
Slewing speed: 1.5 - 2 rpm. (nominal)
Boom rotation: 360º continuous
Outriggers
Outriggers: Out-and-down style
Outrigger monitoring system (for verification only)
Outrigger motion alarm
Full extension
• Front and rear: 24.5 ft. (7,5 m)
Middle extension
• Front and rear: 17.5 ft. (5,3 m)
Full retraction
• Front and rear: 7.8 ft. (2,4 m)
ROC Solid - Radio operated handheld controller for outrigger, winches and FBS setup
Crane is shipped with the boom radio remote ready.
Operator aids
Externally routed A2B cable. Color graphic display with LMI crane function cut-offs for overload protection, event recorder and WADS-Work Definition System.
HDRI - Hoist Drum Rotation Indicator
vtHoist, Rope and Hook
Maximum theoretical line speed: 453 fpm (138 mpm)
Maximum theoretical bottom-layer line pull: 13,050 lbs. (5,919 kg) Limited to 10,000 lbs.
Main winch cable diameter: 5/8 in. (15,9 mm) rotation resistant
Line length: 60131 - 500 ft. (152 m)
Main winch: Bent axis 2-speed hydraulic motor (activated electrically)
Optional Third Wrap Limiter on both Main and Auxiliary Winch
Hook and Ball: 7T (6,4 mt) capacity hook with heavy-duty swivel and weight is provided for single line operation
Hydraulics
8-bolt direct mounted PTO and SAE C output (factory mounted units only)
1-Section Variable Displacement Piston Pump, SAE C input
Piggy back Fixed Gear Pump
Hydraulic Reservior capacity: 115 Gallon-155 Gallon
Pump Sections @ 2000 RPM with 100 PSI
• Variable Displacement Pump: 77 GPM (291 lpm)
• Fixed Displacement Gear Pump: 12 GPM (45 lpm)
• Optional Front Bumper Stabilizer
Tiltable Cab/Cab Controls
Standard features:
Curved glass, 0º to 20º cab tilt, Sliding door, heated cloth seat, 8 seat adjustments, lumbar support, reclining and adjustable head rest, sliding windows, rear pop out window, top hinged hatch, with guard, front and top windshield wipers, heater, air conditioning, 12 volt DC outlet, USB ports, engine monitoring system, E-coated cab
Controls:
PLC crane controller, CANBUS communication, J1939 truck engine communication, electric hand and foot throttle, twin dual axis joysticks, electric/hydraulic valve actuation, electronic sensor monitoring, Hirschmann/PAT or 3B6 LMI system available, wired ATB and wired wind speed sensors, telematics, GPS monitoring, remote diagnostic capability, Work Area Definition (WADs)