Valla 25
Valla 25
Capacity:
Max Tip Height:
Max Working Radius:
Weight:
4,950 lbs for 25EL and 5,500 lbs for 25E
15 feet
10 feet
4,400 lbs for 25EL and 5,300 lbs for 25E
Available in 2 models, with heavy counterweight in the 25E(25 Electric) and 25EL(25 Electric Light). The only physical difference between the units are the counterweights. Valla 25EL weighs in at 4,400 lbs while the heavier 25E weighs in at 5,300 lbs. Each unit comes programmed with an LMI specific to the model. Boating a 15’ tip height and 10’ of horizontal outreach, the Valla 25EL has a maximum capacity of 4,950 lbs while the 25E has a maximum of capacity of 5,500 lbs. Valla 25 Series cranes all feature a standard color LMI for safe operation and a wired remote control for precision. Valla 25 Series is equally at home in glazing, aerospace and rigging industry or anywhere where a high capacity lifting is required with a minimal footprint, and zero emissions.
- Max Capacity: 4,950 lbs for 25EL and 5,500 lbs for 25E
- Max boom Extension: 9’2”
- Max Boom Angle: 55°
- Min Boom Angle: 20°
- Weight: 4,400 lbs for 25EL and 5,300 lbs for 25E
- Conformity: 2006/42 CE; 2014/30 CE; 2014/35 CE; 2000/14 CE; EN 13000
Crane Frame
Three-wheel Pick&Carry design, constructed from high quality steel with a built-in counterweight. Maintaining a compact footprint, without the need for outriggers. Pick&Carry design means ability to move with a load.
Crane Boom
Three section boom; with 2 telescoping sections. Sequential telescoping action using internal dual hydraulic cylinders, fitted with nylon wear pads and adjustable wear pads on the sides of the boom.
Winch
Dual-speed hydraulic winch equipped with 223ft. of high-grade wire rope. 12,000 lbs minimum breaking point.
Boom Control
Hydraulic boom action using a 5KW 48V powerful pump motor, controlled by electronic proportional joystick distributors. Hand-held remote control with high-speed winch functionality.
LMI
Electronic Load Moment Indicator. New condensation resistant design, LCD display showing lifted load, max allowed load tilting percentage, operating radius, angle, boom telescope length, and more.
Battery
48V 200AH battery power, in two lead-acid 24V battery banks. Battery power meter on dashboard also displays alarms and working hours. Capable of working 8-10 hours without needing a recharge.
Charger
On-board smart battery charger plugs into standard 110V outlets, and automatically stops when full charge is reached. Balances the battery cells and maintains battery health. Full charge requires an 8 hour charge cycle.
Drive Motor
Crane drive powered by an AC, 3KW 48V reversible electric motor, controlled by an inverter.
Steering
Power assist steering tiller, with 180° rotation powered by AC electric steering assist motor, controlled by an inverter. Complete with proportional joystick controls and an anti-crushing safety device when reversing.
Brake
Electromagnetic disc brake engages automatically, and is integrated into drive motor.
Wheels
3-wheel design, non-marking wheels.
Three-wheel Pick&Carry design, constructed from high quality steel with a built-in counterweight. Maintaining a compact footprint, without the need for outriggers. Pick&Carry design means ability to move with a load.
Crane Boom
Three section boom; with 2 telescoping sections. Sequential telescoping action using internal dual hydraulic cylinders, fitted with nylon wear pads and adjustable wear pads on the sides of the boom.
Winch
Dual-speed hydraulic winch equipped with 223ft. of high-grade wire rope. 12,000 lbs minimum breaking point.
Boom Control
Hydraulic boom action using a 5KW 48V powerful pump motor, controlled by electronic proportional joystick distributors. Hand-held remote control with high-speed winch functionality.
LMI
Electronic Load Moment Indicator. New condensation resistant design, LCD display showing lifted load, max allowed load tilting percentage, operating radius, angle, boom telescope length, and more.
Battery
48V 200AH battery power, in two lead-acid 24V battery banks. Battery power meter on dashboard also displays alarms and working hours. Capable of working 8-10 hours without needing a recharge.
Charger
On-board smart battery charger plugs into standard 110V outlets, and automatically stops when full charge is reached. Balances the battery cells and maintains battery health. Full charge requires an 8 hour charge cycle.
Drive Motor
Crane drive powered by an AC, 3KW 48V reversible electric motor, controlled by an inverter.
Steering
Power assist steering tiller, with 180° rotation powered by AC electric steering assist motor, controlled by an inverter. Complete with proportional joystick controls and an anti-crushing safety device when reversing.
Brake
Electromagnetic disc brake engages automatically, and is integrated into drive motor.
Wheels
3-wheel design, non-marking wheels.