Powerful, compact, lightweight, and technologically advanced, PM 100SP is the top-of-the-range heavy crane series. The new, compact crane is lower and narrower in design. The use of high-strength materials has mean that thicknesses have been reduced, thereby lowering crane weight and increasing the truck bed’s usable residual capacity. The new octagonal section of the telescopic arms makes a higher load capacity possible. The unlimited rotation system is designed for intensive, highly repetitive use. The radio-controlled outriggers, with a 29 ft 10 in. (9100 mm) opening, are equipped with the MCS systems, which guarantees safety during the stabilization phase. Thanks to the type 5 interlock system, the crane’s load capacity is calculated electronically in relation to the outrigger arm extension. The standard crane is available with 4, 6, 8, or 9 extensions. The jib can be combined with the standard cranes with 4 or 6 extensions. The result is a maximum horizontal outreach of 110 ft. 1 in. (33.55 m) and a maximum vertical outreach of 122 ft. 6 in (37.35 m) More maneuvering control in confined spaces is provided by a negative angle of 15 ° on the secondary arm and 20 ° on the jib. PLATINUM Cranes equipped with LINK system on the articulation Multifunction Radio remote Control Proportional compensated valve block Oil cooler Endless slewing Electronic System PM Power Tronic Available in LC version